Pressure Fermenter 30L: UniTank+Keg
5,428 4,988 Add to cart

Pressure Fermenter 30L: UniTank+Keg



This kit includes:
1 x All rounder tank
1 x Stainless Steel Handle Assembly
1 x 304 stainless stand
1 x Airlock
1 x Pressure rated lid
1 x Digital temperature sticker
1 x Red 2.5bar pressure relief valve
1 x Graduation Sticker

Easy to Clean
This fermenter is made from super-smooth PET so it’s easy to clean. No scrubbing is necessary.

Large 120mm Opening
The opening at the top is significantly larger than the older Snub Nose or other similar fermenters.  This bad boy has a 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.

Pressure Rated
This fermenter is rated up to 2.5bar so you can force carbonate just like a keg.  You can use this fermenter for closed transfers and significantly reduce oxygen exposure.

Crystal Clear
The wall of the All Rounder is crystal clear so you can see what’s going on inside.  This makes it really easy to determine visually how the fermentation, how the yeast is flocculating etc.

The PET plastic is not permeable like some other fermenters made from PP or HDPE.  The fermenter wall is a much better gas barrier keeping your product fresher for longer.

No Flavour and Aroma Carry Over
Other HDPE fermenters tend to be so porous they carry flavor and aroma from one batch to another.

Robust and Difficult to Damage
Impossible to smash like glass.  The tank is impact-resistant but lightweight and easy to use.

IMPORTANT NOTE: This tank should not be used for hot liquid.  Do not put liquids inside this tank over 50C.  It will melt the tank.  Also, this tank comes pressure tested however we recommend that every 2 years you re-hydro test this tank yourself.  Please contact us for more information regarding how to hydro test or refer to the hydro-test instruction manual in the ‘instructions’ tab.

We would also like to point out that the photos are of the FermZilla – All Rounder 30L with a red plastic pressure kit. Those items are not included in the standard kit. (You need to buy the red carbonation caps and SS Float Separately)

(2 customer reviews)

In stock

Only 24 items left in stock!

The FermZilla AR30 is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating, and dispensing.  It’s far more capable than the FermZilla Flat bottom but it’s less complicated and less expensive than the conical fermenters.  So like the name says it’s the “All Rounder”.

If you want to use this product under pressure we would recommend that you use the pressure kit. (red carbonation caps and SS Float bought separately)

To download the size/dimensions of this tank KL15233 – All Rounder_30L dimensions.

Please read the Fermzilla all-rounder Instruction Manual thoroughly before use. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak-proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-molded thin-walled vessels. But don’t panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

FermZilla All Rounder - It's Like a Keg and Fermenter Combined

2 reviews for Pressure Fermenter 30L: UniTank+Keg

Based on 2 reviews
5 star
4 star
3 star
2 star
1 star
  1. Thiruppathi P (verified owner)

    Received in time, would be better if it was tightly packed with some air bubble packs inside, any how it wasn’t damaged.

    • Ankur (store manager)

      Sir this is the original packing of Kegland Australia that is used in over 100 countries but we will pass on your feedback to the manufacturer

  2. Shailesh Chitragar (verified owner)

    Good entry level pressure fermenter

    • Ankur (store manager)

      Shailesh yes these imported plastic unitanks are are great way to make lagers and pressure fermenting before switching to industrial stainless steel fermenters

Add a review

Your email address will not be published. Required fields are marked *