Co2 Gas Manifold

(1 customer review)


4 OUTPUT / 4 WAY GAS LINE MANIFOLD SPLITTER WITH CHECK VALVES – Ideal for kegging and microbrewery dispensing lines.

Out of stock

Categories: ,

These gas manifolds are rated to 100psi and include 4 gas line outputs and 4 x 1/4inch ball vales.
This unit can be turned into a 5 way manifold by adding a 1/4 inch ball valve (as shown in the picture to the left on the 4 way manifold.)

Multiple gas manifolds can be connected together using our 1/4 inch hex nipple (available at LPG stores). This will enable you to make your manifold as large as you like. (shown in picture)
You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly if you want to be able to easily disconnect/reconnect a gas line.

– Made complete from aluminum, brass and stainless so they are durable.
– Includes screw holes at the top for easy mounting to your gas board.
– Each ball valve has a built-in check valve to not only protect your regulator but also prevent gas or beer from migrating from one keg to another. (especially when you are doing nitro-brews)

Please note that due to the check valve mechanism there is about a 2 psi pressure drop over the ball valves in these manifolds. You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg.

1 review for Co2 Gas Manifold

5 star
4 star
3 star
2 star
1 star
Powered by Customer Reviews Plugin
  1. Ankur (store manager)

    nice CO2 gas splitter to attach multiple kegs to a single CO2 tank

    Was this review helpful to you?
Add a review

Your email address will not be published. Required fields are marked *

You may also like…