brewing kettle glass sightbrewing kettle glass sight
BrewZilla Polycarbonate Sight Glass Kit

BrewZilla Polycarbonate Sight Glass Kit


This BrewZilla Sight Polycarbonate Sight Glass also comes assembled with stepless clamps. Compatible with both 35 Liters and 65 Liters electric mashing vessel.

To remove your stainless steel sight glass, start by removing the two screws that mount the top section of the recirculation tube.
Then using a spanner *not included* loosen and remove the bottom 1/2″ female fitting. There is a small white washer underneath. Move that to the side as we’ll need that later for the upgrade!
Swap over the camlock fitting
*Please keep Teflon plumbing tape ready. You will need them to tighten the sight back.
The sight glass itself is not made from glass, it is made from robust polycarbonate.

Only 5 left in stock

Only 5 items left in stock!

Ideal for professional brewers. Allows you to inspect the beer wort color and make adjustments to the mashing/steeping cycle. A good estimate of color and haze is essential to make a perfect beer.

– Stainless ½ inch Male BSP threaded post with o-rings
– Stainless ½ inch Female BSP threaded post with o-rings
– 36cm long polycarbonate tube (13mm ID x 15mm OD)

The stepless clamps used are 14-16mm.


There are no reviews yet.

Be the first to review “BrewZilla Polycarbonate Sight Glass Kit”

Your email address will not be published. Required fields are marked *