Beer lines, microrbewery taps, pressure gauges, valves, connectors and everything that you need to connect your pressurized beer tank into your perfect beer pour.
-
- Add to cart
- Microbrewery Fittings
Stepless Clamp for your Beer Lines
- ₹30
- Avoid leaking and dripping lines by these stepless clamps. Attach once and ensure that the attachments are secure forever. Neat connection without bolts, screwdriver and hassles. Also unlike the butterfly clamps, the stepless clams are a perfect circle (no flatside which causes uneven pressure and worn out/cracked beer lines.)
-
-
-
- Add to cart
- Microbrewery Fittings
Beer Line MFL Washer: Nylon Flare
- ₹15
- Nylon Flare Washer Olive for MFL Fittings suitable for: Regulators Ball-lock or pin lock disconnects Any 1/4 SAE standard fitting The same washer fits gas and liquid line connects.
-
-
-
-
-
- Add to cart
- Microbrewery Fittings
Beer Line Hose 5mm ID 8mm OD Flexible
- ₹650
- 12M of multilayer flexible beer tube. These tubes are food grade and designed for CO2, N2, and Beer lines. EVA Barrier from Kegland comes with multi-layer protection to prevent oxidation, be flexible enough, and prevent leakage of joints. Inner diameter is 5mm which will fit most barbed and MFL fittings
-
-
-
- Sale!Add to cart
- Microbrewery Fittings
Beer Line Push-in Fittings: 8mm(5/16) x FFL
-
₹150₹141 - Kegland's duotight fitting for high-quality seal. It is ideal for those who prefer the screw type fitting rather than struggling to get the beer line over the barbed end of the connector. Has two high-quality food-grade EPDM o-rings for a very tight seal. Compatible with any 8mm OD pipe (4mm or 6mm inner pipe). No clamps. No struggling to get…
-
-
-
-
-
- Sale!
-
- Add to cart
- Microbrewery Fittings
Silicone Faucet Plug (Drip Free)
- ₹70
- Keep your beer taps drip and fly free. These unique silicone faucet plugs are of universal size so they suit any tap faucet of a diameter 10mm up to 17mm. The plug is an economical solution for controlling fruit flies, yeast, and bacteria build-up when the faucet is not in use.
-
-
-
-
- Add to cart
- Microbrewery Fittings, Home Brew Fittings
Multi-functional Spanner Wrench: Beer Faucet
- ₹265
- This 7 in 1 tool is perfect for most keg and tap fittings. Check the images for details on each of the 7 features.
-
-
-
-
-
-
- Sale!Add to cart
- Microbrewery Fittings
HEPA Gas Filter 0.2 micron
-
₹234₹175 - Worried about microbes contaminating your beers and wines. This filter is used during wort oxygenation and CO2 pumping during kegging.
-
-
-
-
-
- Sale!
-
- Sale!Add to cart
- Microbrewery Fittings
Beer Line 8mm Push in Joiner
-
₹141₹103 - Kegland's duotight fitting for high-quality seal. It is ideal for those who want to join the beer lines, repair cuts/ kink/ puncture/ leakage. No clamps necessary. Has two high-quality food-grade EPDM o-rings for a very tight seal. Compatible with any 8mm OD pipe (4mm or 6mm inner pipe). No clamps. No struggling to get the barb fitting required. It is…
-
-
-
-
- Sale!
-
- Add to cart
- Microbrewery Fittings
Corny Keg Post Seal Repair O-Ring
- ₹25
- These universal gaskets fit all types of home brewing kegs. Repair your old and second-hand Cornelius kegs, ball lock kegs, corny kegs, and pin lock soda syrup cans. Contains 1 ring. Please buy 2 if you want to replace both beer/kombucha and CO2 rings. PS: Back order will be shipped in December 2nd week only.
-
-
-
-
- Add to cart
- Microbrewery Fittings, Home Brew Fittings
Microbrewery-Beer Tap Long Stainless Shank
- ₹1,631
- These long shanks are suitable to attach taps to a Jockey Box (esky) or Fridge/Freezer wall. You will need a 22mm Size Holesaw in order to get a snug fit. Also Compatible with: Perlick, Brumby, Micromatic + many more.
-
-
-
-
- Sale!Add to cart
- Microbrewery Fittings
Hose Tube cutter
-
₹150₹104 - Make neat cuts to your pipes, hose. Ideal for DIY beer keg setup.
-
-
-
-
-
- Sale!
-
- Select options
- Microbrewery Fittings, Brewing Kettle
Washer 21mm ID 1/2 inch for Mashing Kettle Conical Fermenter
- ₹55 – ₹106
- Choose between: 304 Grade Stainless Washer Silicone Washer For 1/2′ BSP. Compatible for any 1/2 inch plumbing. 2mm thickness for a very tight seal. No joints, welds, and this washer should last for years. However, it is recommended to be checked every 6 months for wear and tear. Ideal for conical fermenter, mashing kettle, Lauter-tun, and microbrewery plumbing
-
-
End of content
No more pages to load